The ekofires 3010 Inset Gas Fire.
Ageless and ultra slim in design and appearance- an attractive and alluring fire to fit with any fireplace in any living room.
The entry level 3010 is particularly suitable for installations into new homes with shallow starter block's and some pre-cast flue systems, however, is perfectly at home when used with a conventional chimney.
For a modern aesthetic why not choose the 'Contemporary' frame in brushed stainless steel and opt for a pebble fuelbed. The 3010 also has the added benefit of a mains-free ultrasonic remote control (optional extra) that allows you to adjust the flame height from the comfort of your armchair.
Chimney/Flue
Requirements |
Conventional Chimney
Pre-cast flue
pre-fabricated flue (Min.5") |
Fire Type |
Slimline Radiant |
| Efficiency |
50% |
Control Type |
Manual - Rotary
Remote Control |
Heat Input
(max-min) |
6.2kw/3.5kw |
Heat Output
(max-min) |
3.1kw/1.8kw |
Running costs
per hour (max-min) |
26.47p/14.95p |
Safety |
Oxygen Depletion Sensor
Flame Failure Device |
| Air Vent Required |
Not Required |
|
|
.jpg) |
Dimensions
A - 485mm
B - 590mm
C - 130mm
D - 108mm
E - 212mm
F - 585mm
G - 60mm
Opening Dimensions.
X (Min) - 350mm
X (Max) - 450mm
Y (Min) - 540mm
Y (Max) - 575mm
|
Trim and Fret
| Should you require any assistance in choosing or ordering any of our products, please do not hesitate to contact our customer services team. |
| |
| (Lines open 9am - 8pm, 7 days a week) |