Eko Fires 3010 Inset Gas Fire
- In Stock | 3-5 Day Delivery
The Eko 3010 is particularly suitable for installations into new homes with shallow starter blacks and some pre-cast flue systems, however it is perfectly at home when used with a conventional flue.
|Fuel Bed Options||Coal, Pebbles|
|Control Type||Manual Control, Remote Control|
|Gas Options||Natural Gas (Mains Gas)|
|Chimney Type||Pre Cast (Class 2), Pre Fabricated (Class 2)|
|Fire Type||Slimline Gas Fire|
|Type Of Heat||Radiant|
|Safety||Flame Failure Device, Oxygen Depletion Sensor|
|Glass or Open Fronted?||Open Front|
|Air Vent||Not Required|
|Finish Options||Black, Brass, Silver|
|Overall Height (A)||590mm|
|Inset Height||540 (min) - 575 (max) mm|
|Inset Width||350 (min) - 450 (max) mm|
Q & A
For this you would need an installer either HETAS approved or gas safe registered, you can find the details to both here -
Thanks very much
Free Delivery - For Full Details Please See Delivery Information
If the goods are showing a 48hr delivery, then this is the quickest time we're able to deliver these items. You will be asked to select a delivery date when you're going through the checkout process. The goods will be delivered on this day.
Smaller items such as inset gas fires and electric fires are delivered by a courier. You will be contacted beforehand and a convenient delivery date agreed.
Once your parcel is dispatched, you will receive a text message confirming your delivery date and a tracking link that will keep you updated of your parcel's progress.
This is an all-day ground floor doorstep service. All items must be checked for damage in front of the driver before being signed for. Please contact us immediately in the unlikely event that damage has occurred.
PLEASE NOTE THAT WE STRONGLY ADVISE THAT YOU DO NOT BOOK ANY CONTRACTORS, PLUMBER’S, OR FITTERS UNTIL YOU HAVE RECEIVED YOUR GOODS AS UNEXPECTED DELAYS CAN OCCUR.