The Pembroke Cast Iron Combination fireplace, from Gallery Fireplaces is shown here with a granite hearth. A slightly larger than usual cast iron combination fireplace the Pembroke lends its’ self to a slightly larger room. The Pembroke cast iron combination fireplace is suitable for use with gas, electric and solid fuel fires.
The fire insert comes with a choice of fire options. It can be used for solid fuel, gas or electric fire.
Please Note: When ordering this combination for decorative use, no grate or ashpan is included.
Specifications
Recess Required
Yes
Finish Options
Black, Full Polished
Chimney Type
Brick Chimney (Class 1)
Product Sizes
Body Width (A)
1040mm
Height (B)
1040mm
Opening Width (C)
445mm
Opening Height (D)
660mm
Overall Width (H)
1205mm
Inset Width (I)
620mm
Inset Height (J)
725mm
Inset Depth (K)
210mm
Reviews
Product Questions 4
Hi, I have this fire with the gas insert and I’m wanting to change to solid fuel is this possible?
Question by: Maria on 13 Apr 2025, 11:43
Hi Maria,
Thank you for your question.
You would in theory be able to purchase the solid fuel kit to convert, which will include an ash pan, grate and solid fuel damper.
It would however be recommended that you install this with a hearth slabbed and sectioned for solid fuel appliances, as per the below:
You would also require a gas registered engineer to disconnect the current gas burner.
We hope that this information helps. If you would like a quotation for a new solid fuel kit and hearth then please contact Sales via 0161 376 4181 or [email protected]
Answer by: Jack on 14 Apr 2025, 12:07
Hi there,
The hole in my wall for my chimney is:
48.5cm wide
87.5cm high
23cm depth
Will this fit? Can you let me know if I should be using the inset measurements listed or the opening measurements listed
Question by: Shaz on 27 Jul 2023, 19:36
Hi,
Thank you for your enquiry.
You should be looking at the inset sizes.
Hope this helps
Answer by: Damian Todd (Admin) on 28 Jul 2023, 15:22
Hi there, can this go on a flat wall and does the electric version have a fan heater. Thanks
Question by: Jacqueline on 27 Apr 2023, 15:04
Hi,
Thank you for your enquiry.
The only way to install this on a flat wall is to fit it without the cast back. If you install it this way, you can not have any burner.
Hope this helps
Answer by: Damian Todd (Admin) on 21 Jul 2023, 10:25
Hi, could you tell me what the heat output is on the gas fire please? Thanks
Question by: Alan WIilliams on 2 Aug 2021, 21:18
Hi Alan, thanks for getting in touch.
The gas fires that are in these cast iron inserts are classed as decorative and therefore do not have a rated heat output or efficiency rating.
Our "Free Delivery" is a one-man service. The goods will arrive on a lorry that is about the size of a fire engine. (Please let us know in advance if you have restricted access or other local issues that could affect delivery).
The lorry has a tail lift that allows the driver to get the item(s) off the vehicle. The order will be packed and secured onto a pallet and the driver will have a pallet truck. He'll be able to wheel this as close as possible to your property. The pallet truck can only be wheeled over a finished surface so it's not possible to wheel it over a gravelled drive, steps, steep slopes for example. The pallets are normally about 1m wide so this is the minimum width gate they can fit through. Please note that the driver is not insured to unpack or carry the item(s) into your house.
Fitting Kits and Liner Packs might arrive separately by courier delivery on the same day unless specified/requested in advance. An email confirmation will be sent if this is the case.
If the goods are showing 48hr delivery, then this is the quickest time we're able to deliver these items (We do not deliver at weekends). You'll be asked to select a delivery date when purchasing the goods. Please note that if you live offshore these dates do not apply as it will take us slightly longer to get the goods to you and we will contact you directly.
Please note that it is an all-day delivery service which is generally from 9 am – 6 pm Monday to Friday. Delivery Depots, if they have the facility, will text in advance but as the vans do multiple runs a day you might not receive a text until the afternoon if this service is available.
Due to current pallet network pressures mainly due to driver shortages we cannot guarantee delivery on your chosen day but will do our best to communicate this as soon as we are made aware by the carriers.
PLEASE NOTE THAT WE STRONGLY ADVISE THAT YOU DO NOT BOOK ANY CONTRACTORS, PLUMBER’S, OR FITTERS UNTIL YOU HAVE RECEIVED YOUR GOODS AS UNEXPECTED DELAYS CAN OCCUR.
User instructions for electric fires used with cast iron fireplace inserts. This guide covers various products. A separate sheet with the correct dimensions is also available in the user guide section.
This heater is suitable for use with the following Cast Iron fireplaces; Bolton, Celtic, Crown, Falkirk, Lytton, Jubilee, Henley, Pembroke and Gloucester.
Visit our Showrooms
Experience the real heat of a gas fire and the innovation of a modern electric fire at our showrooms.
Cheadle
Stanley Green Retail Park, Earl Rd, Cheadle SK8 6PT
PRICE MATCH – CONTACT US IF YOU FIND IT CHEAPER ELSEWHERE
If you find this product cheaper online or in-store please contact us at [email protected] or click the price match button on this page and give us the opportunity to match the price.